CALER DIGITAL FLASH UNIT HEAD E200
The flash power dial allows the user full control of the output power. Different from other studio flash that has "stop dials" at set power levels only, this unit's flash power can be adjusted bit by bit from full power down to 1/8 power. With this design, you can conveniently make small adjustments to the flash power.
Modeling Lamp Mode
The brightness of the built-in modeling lamp is not only controllable but clever enough to adjust itself according to the output power of the flash under proportion mode. It can even turn itself off simultaneously when the flash is triggered under modeling lamp mode.
Tired of excessive wiring on the set? Connect this flash unit to a wireless flash trigger for wireless control! No longer will the positioning of the flash be limited by the cable length. flash trigger sold separately.
Alternatively, you may use E-200’s built-in IR slave sensor to trigger the flash. It will fire whenever it receives signal from an infra-red flash trigger(IR Flash trigger sold separately)
Equipped with a guide number of 42, this studio flash unit offers a powerful lighting source. Recycling time is at 0.5 to 1.4 seconds only.